top of page



Opto22 EPIC Controller Battery Voltage Reading Using Node-Red
Welcome automation nerds! Today we are going through the process of setting up a custom Node-Red node I developed to read the voltage of the internal EPIC battery. You can use this node to integrate the battery voltage reading into your control strategy to do whatever you want, like activate an alarm when it drops below a certain threshold. This would be useful to let an operator know that retained settings will be lost when the controller loses power due to the battery volt

LS
Oct 273 min read


Week 24 Update & Rule#5
Good afternoon automation nerds. Last week ACI was in Houston for an Opto22 controls upgrade at a top secret facility (well not really, just can't tell you). We removed an LCM4, many B3000s, handfuls of old SNAP-OAC5s & SNAP-IAC5s and other old hardware that was controlling a plastic extrusion machine. I would like to tell you that the control panels were clean with wires and cables nicely routed, labeled and secured inside the wire way but, as you already know, that is RARE

LS
Jun 11, 20253 min read


Automated Concepts' Recipe Manager Software for Dalworth Machine Products
ACI's Recipe Manager

LS
Nov 23, 20222 min read


Upgrading A Legacy HMI & Control System
Upgrading old control system to the modern era.

LS
Aug 29, 20222 min read


bottom of page
