Our latest project. Check it out!

Looking for custom Phoenix terminal block markers?

Good afternoon automation nerds. Last week ACI was in Houston for an Opto22 controls upgrade at a top secret facility (well not really, just can't tell you). We removed an LCM4, many B3000s, handfuls of old SNAP-OAC5s & SNAP-IAC5s and other old hardware that was controlling a plastic extrusion machine. I would like to tell you that the control panels were clean with wires and cables nicely routed, labeled and secured inside the wire way but, as you already know, that is RARE

Today we have an example of this with a couple of control panels recently installed (not by us, obviously) at a customer’s site. The...

Week 20 Project updates for HPU and ARU

Copley Motor Drive Configuration

ACI's Digital Chart Recorder

Quality Control Issues

500hp Motor Thermal Protection & Monitoring System

Tribometer Control Panel Rebuild

Control System for Two Reactors

Pile Driver DAQ Panel

Automated Smoker

Protect your control systems from electrical discharges

New Panel Builds!

Control system rebuild on a broken machine.

ACI built 3 DAQ (Data Acquisition) panels for a company in Houston, Texas. These were mounted on the wall inside a high pressure testing...

Legacy Equipment For Sale

When working with any mission critical electronics rule #1: Be careful. The saying "If it ain't coming off then your not trying hard...

When working with Opto22 EPIC controllers having a documented setup procedure that details, step-by-step, the process to correctly...