top of page
Week 24 Update & Rule#5
Good afternoon automation nerds. Last week ACI was in Houston for an Opto22 controls upgrade at a top secret facility (well not really, just can't tell you). We removed an LCM4, many B3000s, handfuls of old SNAP-OAC5s & SNAP-IAC5s and other old hardware that was controlling a plastic extrusion machine. I would like to tell you that the control panels were clean with wires and cables nicely routed, labeled and secured inside the wire way but, as you already know, that is RARE
LS
Jun 113 min read
Automated Concepts' Recipe Manager Software for Dalworth Machine Products
ACI's Recipe Manager
LS
Nov 23, 20222 min read
Tribometer Control Panel Rebuild
Tribometer Control Panel Rebuild
LS
Oct 4, 20221 min read
R&D Lab Process Control System For Two Reactors
Control System for Two Reactors
LS
Sep 29, 20222 min read
Solar Panel Support Installation Monitoring and Reporting Panel
Pile Driver DAQ Panel
LS
Sep 27, 20222 min read
BBQ Smoker Trailer Automation With Wireless Interface
Automated Smoker
LS
Sep 6, 20223 min read
Rule #4: Operate under the assumption that all wires are live.
Automation Rule #4: Operate under the assumption that all wires are live.
LS
Sep 1, 20222 min read
Protect Your Sensitive Equipment From Lightening & Electrical Surges
Protect your control systems from electrical discharges
LS
Aug 31, 20222 min read
You bought a machine and it never worked?
Control system rebuild on a broken machine.
LS
Aug 28, 20221 min read
Automating & Troubleshooting Chinese Machines.
Trouble with Chinese Machines?
LS
Aug 25, 20223 min read
Server Room Temperature Monitoring For Critical Network.
Problem: Critical server room HVAC drain line backed up and tripped the float switch, turning the A/C off to the room allowing the temp...
LS
Aug 18, 20221 min read
bottom of page